SeDiv Lab

 نسيت كلمة المرور
 التسجيل
بحث
مشاهدة: 249|رد: 1

[شرح] SAMSUNG REPAIR METHOD

[نسخ الرابط للاقتباس]

32

المواضيع

251

المشاركات

1662

الأرصدة

SeDiv User

Rank: 5Rank: 5

الأرصدة
1662
تم نشره منذ 2019-05-24 06:07:10 | رؤية جميع المشاركات |نمط القراءة فقط
SAMSUNG  REPAIR METHOD

1.      REPAIR  BAD SECTOR WITH HT CODE
-         Choose HT code same as hddmodel need to repair
-         Download to the drive
-         Once download success ,connect the hdd to independen power suplai
-         Check the hdd led by usingthe led ( see the picture in Led position document)
-         If fast blinking , it mean, drive are ready to downloading the BI code
-         After download BI code ,again connect the drive to indenpenden power suplai for 8-14 hours
-         If after 8-14 hours drivestop and we must check again the led , if fast blinking , it mean drive repairgood already , if slow blinking , it mean drive unrepair  ( must do cut head)
-         Fast blinking drive need todownload the maincode
-         For slow blinking needcheck the head
-         
2.      REPAIR BAD SECTOR WITH HTBICODE
-         Choose Fflash code and Htbicode same as hdd model need to repair
-         Download Fflash , power off/on
-         Entry to module operation ,open and selected module Bi Scrpt , write all to zero 000000 then save to hdd ,write selected to hdd
-         Download HTBI code
-         Connect the drive to powersuplai for burn in 8-16 hours
-         If after 8-16 hours drivestop and we must check again the led , if fast blinking , it mean drive repairgood already , if slow blinking , it mean drive unrepair  ( must do cut head)
-         Fast blinking drive need todownload the maincode

3.      FIX  Knocking sound
-         Set  the jumper to safe mode  close all pin except the last pin
-         Downloading  HT code or Fflash depend on hdd model
-         After download finish ,power off /on , set jumper to normal ,
-         Knocking sound should befix , check head , which are BAD
-         Set Bad head , GO ,downloading Fflash
-         Entry to module operation ,open and selected module Bi Scrpt , write all to zero 000000 then save to hdd ,write selected to hdd
-         Downloading HTBI or BI codedepend on what hdd model .
-         Connect the drive to powersuplai for burn in 8-16 hours
-         If after 8-16 hours drivestop and we must check again the led , if fast blinking , it mean drive repairgood already , if slow blinking , it mean drive unrepair  ( must do cut head)
-         Fast blinking drive need todownload the maincode
-         

يجب عليك تسجيل الدخول قبل إضافة رد تسجيل الدخول | التسجيل

قوانين النقاط

إتصل بنا|الغرفة المظلمة|الهاتف المحمول|الأرشيف|SeDiv Lab

بتوقيت جرينتش +2, 2019-08-26 08:13 , Processed in 0.055795 second(s), 20 queries .

Powered by Discuz! X3.2 Licensed

© 2001-2019 Comsenz Inc.

Arabic version, Rev. 76, © 2011-2019 , Ar-Discuz.Net

الرد السريع عودة إلى الأعلى عودة لقائمة الأقسام